honeywell scanner configuration barcodes

Honeywell Scanner Configuration Barcodes Code Scanning Method

For EDA 51-X accessories and description, please see below table: Item Description EDA51 home base Charging one EDA51 terminal and EDA51 battery simultaneously EDA51 single cradle Charging one EDA51 terminal.

In any case, users should confirm with HII whether any changes were made.

The terminal has been connected to external power supply for charging.

If the failure still exists, please contact LED flashing red Honeywell technical support.

For detailed setting methods, please refer to Default power indicator description Connect to power supply Indicator status Description Flashing amber (Orange).

Honeywell technical support recommends you store battery in a charger to maintain battery performance.

Using the battery for other devices may cause damages on the device or the battery.

If you suspect that a battery or terminal fails, send it to Honeywell service center for verification.

Open Switch control of Airplane Mode to enable airplane mode.

Please note: after complete the installation instructions, the welcome interface will not appear again.

The interface appears as locked screen interface after each time you switch on the terminal.

Honeywell Scanner Configuration Barcodes Code Scanning Method

For barcode scanning method, please refer to the chapter Scanning barcodes.

Scanning indicator definition Light of the indicator Meanings Green Good read for the barcodes Barcodes reading failed.

You may set the backlight intensity based on the environment.

Tap Settings. Tap DisplayBrightness level Tap Adaptive brightness to automatically adjust the backlight intensity, or slide adjustment bar to set the backlight intensity.

Adjust the volume by pressing volume key or slide volume bar.

Hold down the volume down (-) button or pull the volume indicator to the extreme left to activate vibration mode.

Audio and sound settings Settings Description Use the volume adjustment bar to set the volume for: Media Volume Music, videos, games and other medias.

Use the volume adjustment bar to set the volume for: Alarm Volume Alarm and alert tones.

Honeywell recommend the using of Single Level Cell (SLC) graded SD memory card or SDHC memory card in order to achieve optimum performance and durability.

By connecting the terminal to a computer with a USB cable, you can view the files in the terminal, or transfer the files to the computer, or transfer files from the computer to the terminal.

If necessary, please contact your local sales representatives.